Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who loves the responsiveness of gas cooktops, but still requires an oven to bake in? Find a dual-fuel range cooker that gives you the best of both worlds.
Gas cooktops are favored by many home chefs with years of experience in the kitchen due to their superior temperature control. They also allow them to use advanced cooking techniques, such as charcoaling. These powerhouse stoves can be expensive, particularly when you need an additional gas hook-up as well as an electrician for installation.
What is a 13amp outlet?
If you have a dual fuel range cooker (also called a gas and an electric oven), you will need an outlet with 13 amps. The plug must also be hard-wired by a qualified electrician into the cooker ring.
This ensures that the current flowing through the plug is safe and not excessive, which could create an electrical fire hazard. The current is controlled by a fuse in the plug. The fuse goes out when the current flows through it over its capacity, which safeguards the appliance from overcharge of electricity.
The fuse is rated at 13 amps as indicated on the top of the plug and this is the maximum amount of current that the plug can carry without causing damage to the appliance or overheating the socket. It is important to ensure that when replacing fuses, you always use the same amps as the original. If you replace the fuse using one with a different rating, then you risk overheating the socket, and potentially placing yourself and others at danger.
A 13 amp fuse is likely to be a ceramic type, which is very durable and is able to withstand high temperatures produced by the range cooker. Ceramic elements are also resistant to fire and therefore a better choice over other types.
There are several ways in which a 13 amp plug can be installed. The plug can be connected to a live socket with either a screw or a jaw cord clamp. The clamp must be tightened after the plug has been tightly pushed into place.
Before connecting the wires, you may have to remove the wiring diagram on cardboard which is placed over the pins of certain plugs. The wires need to be cut to the proper length, because when they are too long, they could be crushed when the plug covers are replaced. The earth wire should be the longest to ensure that it is connected before the line and neutral pins.
How do I install the 13amp plug?
The majority of dual fuel range cookers sold in UK are powered by an amp rating of 13 amps. This is important because ovens draw a significant current, and normal plug sockets have a 10-amp rating.
In general, new appliances should be fitted with a plug at the point of sale. This is all part of complying with the Plugs and Sockets etc (Safety) Regulations 1994. However, older appliances may not have a plug and this is where the problem arises.
When connecting a cooker to an existing plug socket the first thing that needs doing is to check that the rating of the fuse in the box is the same as that of the plug's. This is very important since a faulty sized fuse could be dangerous.
It is also recommended to ensure that the fuse is set within the cartridge and that there isn't any movement within it. The next step is to prepare the flex to be used. Remove the sheathing to expose the three conductors that are insulated. Use a utility blade to cut the sheathing just beyond the cord grip at the entry point of the plug. The blade will not be able to penetrate the insulated conductors. This nick must be large enough to allow for the cable and sheathing to separate as the sheathing is pulled back. Finally cut off the excess sheathing and leave about 40mm over the flex end.
The flex should be positioned over the plug with the earth terminal on the top and the neutral and live terminals on the bottom. Utilizing the colored conductors to guide you and the sheathing is removed from each pin, and the internal cable is then plugged into the appropriate terminal using the cord grip. If the plug has a clamp for cords that is screw-type, loosen it and then pull the insulation back to reveal the copper wires. Finally, connect each of the conductors insulated to the correct terminal (starting with the earth before neutral, and then the live) using the channel they run through in the plug.
What is the maximum current draw of a 13amp plug?
The maximum current draw of a 13amp plug is 3kw at 230 volts. This is a large amount of power, however the standard fuse on a UK plugtop won't fail until the cable reaches a dangerous temperature. It is essential to be aware of the amount of power you are using in your kitchen, as a faulty plug or socket can lead to an accident.
The fuses in plugtops are ceramic, about 25mm in length and 240V mains rated. They will feature a BS kitemark or similar mark on the side and will contain sand. Plastic or glass alternatives are available, but they should not be used in combination with a live plug.
Most dual fuel range cookers in the UK need to be hard-wired and will not plug directly into the wall socket. They are usually connected to a specific cooker ring circuit which is only suitable for appliances that draw up to 20 amps.
You can test the ring circuit at your home by checking the fuse box or asking a local electrician. They will be able to inform you if the sockets in your home are connected to the same ring or separate and if there is a separate circuit for your oven.
If you're considering buying a brand new dual fuel range cooker, the size of your kitchen is an important factor to take into account. We offer a variety of cookers that can fit any space. Select from compact 50-60cm dual fuel models or vast 90cm+ double oven options from leading brands like Rangemaster and StovesAreUs.
We also have a wide variety of multifunction gas and electric cookers. These versatile machines allow you to cook a variety of meals including casseroles, pasta, and curries.
Explore our complete range of Cookers in Currys on our website or visit us in store to browse. We provide free delivery and installation at home on select range cookers, and we also offer flexible payment options. Our team is available to answer any questions you might have. Contact us via email or by phone. Credit is subjected to status, and terms & conditions apply.
What is the maximum current draw of the cooker switch?
There is a lot of confusion about what the maximum current draw of a cooker switch is. The fact is, most cookers aren't designed to plug into the standard socket, but rather are wired hard and connected to a specific oven ring circuit. This is because they typically consume more than 20 amps when the electric and gas hob oven are in use.
There aren't any dual fuel range cookers that can be fitted in standard sockets, as this would pose a significant fire risk and violate electrical regulations. An experienced electrician will install any new electrical components to the kitchen cooker and ensure that the load (both the oven and hob) do not exceed the supply capability of that circuit.
Dual fuel range cookers combine the responsiveness of a gas stove with the precision and precision of an electric oven. This is why they are popular among chefs and home cooks alike. Dual cookers with fuel ranges are ideal for trying out different cooking techniques, including searing or grilling.
When purchasing a new range cooktop, you must take into consideration a variety of factors that include size, performance and price. You will also require a gas connection in your home for the appliance. If you're not sure, it is best to hire a Gas Safe engineer to inspect your property before installation.
The Currys range of dual fuel range cookers has options that can be adapted to a range of budgets, from basic models from Indesit and Zanussi to our exclusive Essentials collection. If you are looking for something more sophisticated we have a selection of premium JennAir models, that come with many innovative features.
It is essential to read the instruction manual for the owner before purchasing a dual fuel range cooker. This will provide specific information about the electrical and gas requirements. It is essential to ensure that your house has a gas hook-up that is suitable, and you may need to get a plumber to install it for you if it is required. It is also possible to require an individual cooker-ring circuit installed by a qualified electrical engineer.